Why would my Hayward Pool Vac suddenly cause a significant reduction in filtration PSI? - what psi does a male urinate
PSI through my filter of the pool has decreased significantly less than 10-15 PSI 5 PSI, where it is my Hayward Pool Vac. I think the FAI ACC are usually somewhat lower psi in the order of 10, but not to the extent that it is now.
This problem started in the last few days. If I remove the CDV of the pipe end to PSI back to normal.
I have a first inspection of the AC and see no obstacles, but I would not rule it out. Is this a common problem?
Saturday, January 30, 2010
What Psi Does A Male Urinate Why Would My Hayward Pool Vac Suddenly Cause A Significant Reduction In Filtration PSI?
2 comments:
Maybe. Larger objects can be in the mechanism of the turbine and get down to reduce the water flow (also shown that the decrease in the pressure filter, who knows) and can also prevent the movement of the main unit. We see that you are getting?
There are cuts in the Hayward site, help to dismantle and clean the device. Check the turbine speed, while you're there, if you have sand in them, they can slow the aircraft and cause flow problems.
In addition, check (hoses, if the device is plugged in and see the pump), whether based on all the sections. It is a widespread problem.
And yes, you're right, it should be connected to a noticeable difference in the pressure at the pool filter Vac, but not too late. (I did the same thing with my Aquacritter, which is under the previous version of this cleaner.)
If your pool water is usually not built to drain skimmer and two locations. If you have your catch vacuum into the skimmer and the floor is completely finished, can cause this problem, because your design is not enough. Open the bottom drain easily. Or the hose of your vacuum has an obstruction.
Post a Comment